Tennsco Technical Workstation - Manual

ASSEMBLY INSTRUCTIONS & PARTS MANUAL #1260409
TECHNICAL WORKSTATION
Tennsco Corp., Dickson, TN 37056-1888 * (615) 446-8000
READ INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING
TO ASSEMBLE YOUR Tennsco TECHNICAL WORKSTATION.
RETAIN INSTRUCTIONS FOR FUTURE REFERENCE!
REFERENCE PARTS STANDARD
NUMBER DESCRIPTION NUMBER QTY. OR OPTION
WORKSTATION COMPONENTS
1 Workstation top (STD) TWDT-wwdd 1 Standard
1 Workstation top (static control) TWST-wwdd 1 Option
2 Workstation leg assembly TWLA-ddhh 2 Standard
3 Support channel reinforcing plate—1 1 
2
“ (Ref. #4) 4 Standard
4 Standard support channel—pair TWSC-ww 1 Standard
4 Electric support channel—pair (shown) TWSC-E-ww 1 Option
5 Workstation footrest TWFR-ww 1 Standard
6 Leveler glide (Ref. #2) 4 Standard
10 Electric support channel wire cover (Ref. #4) 1 Option
 5 
16
“-18 x 1 1 
4
” carriage bolt  8 Standard
 5 
16
“ lockwasher  8 Standard
 5 
16
“-18 nut  8 Standard
 1 
4
”-20 x 5 
8
“ slotted truss head bolt  4 Standard
INSTRUMENT SHELF COMPONENTS
3 Support channel reinforcing plate—1 1 
4
“ (Ref. #4) 4 Standard
4 Standard support channel—pair TWSC-ww 1 Standard
4 Electric support channel—pair (shown) TWSC-E-ww 4 Option
7 Instrument shelf TWSC-ww 1 Standard
7 Instrument shelf (static control) TWSU-ww-S 1 Option
8 Instrument shelf upright assembly TWUA-1518 2 Standard
9 Adjusting screw  2 Standard
 Task light for instrument shelf TWCLT-48 Option
10 Electric support channel wire cover (Ref. #4) 1 Option
DRAWER UNIT COMPONENTS
11 Drawer mounting brackets—pair TWDBK-dd 1/unit Standard
12 Drawer pedestal unit—1 drawer (shown) TWD-10 as ordered as ordered
12 Drawer pedestal unit—2 drawers TWD-20 as ordered as ordered
12 Drawer pedestal unit—3 drawers TWD-30 as ordered as ordered
 1 
4
”-20 x 5 
8
“ slotted truss head bolt  4 Standard
 1 
4
”-20 J-Clip  4 Standard
 Standard hardware item, available locally
 Not Shown in figure
ORDER REPLACEMENT PARTS THROUGH DEALER
FROM WHOM PRODUCT WAS PURCHASED
Please Provide the following information: If dealer cannot supply, order from:
Tennsco Corp.
 Model Number 201 Tennsco Drive
 Part Description and Number as Shown Above Dickson, TN 37056-1888
 Color (615) 446-8000 (800) 251-8184
GENERAL SAFETY INFORMATION
Some parts may have sharp edges. CARE must be taken when handling various pieces to avoid injury. For safety, wear a
pair of work gloves when assembling or performing any maintenance on workstation.
LIMITED WARRANTY
Tennsco warrants goods purchased hereunder to be free of defects in materials and workmanship for a period of one (1) year from the date of shipment, hereunder.
This warranty shall not apply in the event goods are damaged as a result of misuse, abuse, neglect, accident, improper application, modification or repair by
persons not authorized by Seller, where goods are damaged during shipment, or where the date stamps on the goods have been defaced, modified or removed.
UNLESS CONSIDERED UNENFORCEABLE OR UNLAWFUL UNDER APPLICABLE LAW:
a. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO WARRANTIES OR MERCHANT ABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE HEREBY EXCLUDED.
b. BUYERS REMEDY, IF ANY, FOR ANY DEFECTIVE GOODS SHALL BE LIMITED TO A REFUND BY SELLER OR REPLACEMENT OF THE GOODS AT
SELLER’S OPTION, AND SHALL IN NO EVENT INCLUDE DAMAGES OF ANY KIND, WHETHER INCIDENTAL, CONSEQUENTIAL OR OTHERWISE.
NO GOODS ACCEPTED FOR RETURN WITHOUT PRIOR APPROVAL. Seller shall have the right to inspect any goods claimed to be defective at Buyers place
of business or require Buyer to return the goods to Seller for inspection on Seller’s premises. Transportation charges covering returned goods will be borne by
Seller only if such goods are proven to be defective, are covered by this warranty and are returned within the warranty period stated above.
DESCRIPTION
The Tennsco Technical Workstation is designed for use in
today’s high technology manufacturing environment.
Applications include assembly operations, engineering,
product testing, research and development, as well as field
service and technical training. They provide a well organized
sturdy and aesthetically pleasing work environment, which
improves product quality, reduces cost and promotes
improved worker satisfaction.
A heavy-gauge steel frame supports the worksurface as well
as modular accessories, such as instrument shelves,
electrical power rails, storage drawers, task lighting,
cantilever shelves and other accessories. Superior standard
features, such as the adjustable footrest, comfort-radiused
edging on all worksurfaces and fast assembly construction,
provide the user with the cost justification demanded by
progressive management.
SIZE INFORMATION
Basic Workstations are available in widths of 48", 60", 72"
and 96"; depths of 30" and 36"; heights of 30" and 34".
Instrument shelves are available in lengths of 60", 72" and
96" and are 15" deep and 18" high.
Electrical Power Rails are available to fit 48", 60", 72" and
96" length workstations and instrument shelves.
Storage Drawer Units are available in single drawer storage,
two drawer storage/file drawer combination and three
drawer storage configurations.
Cantilever Accessory Racks are available in a width of 36"
and heights of 24" and 40".
Cantilever Accessories, including shelves with dividers and
bin rails, are 36" long; task lighting is 60" long.