Installing with sco openserver – Adaptec 58300 User Manual
Page 36
Chapter 7: Installing the Driver and an Operating System
●
36
Installing with SCO OpenServer
You will need the SCO OpenServer CD to complete this task. To install the driver when
installing OpenServer:
1
Insert the OpenServer Installation CD.
2
Restart your computer.
3
Follow the on-screen instructions to begin the OpenServer installation.
4
When prompted to load more HBA drivers, insert the driver disk, then select Yes. (To load
more HBA drivers, repeat this step.)
5
Insert the driver diskette, then press Enter twice to load the driver.
6
If you are installing other third-party devices, install them now. Otherwise, select No.
7
Complete the SCO OpenServer installation, following the instructions included with your
operating system.
8
Continue with
Managing Your Storage Space on page 41
.