Alpine IVA-C800E - Manual (Page 52)

English
106
Audio Processor
Operation (Optional)
Display the equalizer mode screen by pressing
one of the Function buttons 1 (FLAT) through
6 (NEWS) to select the desired characteristic
curve you wish to change.
1
Press and hold the FUNC (RETURN) button for
at least 2 seconds.
The display changes to show the equalizer
adjustment screen .
2
Rotate the rotary encoder clockwise or
counterclockwise to select the frequency that
you wish to adjust. The colour of the frequency
changes when it is selected.
3
4
Press the rotary encoder to execute the
selection.
Make level adjustments by rotating the rotary
encoder. Press and release the rotary encoder
at the desired level.
Repeat the above steps to adjust other
frequencies.
5
When the adjustments have been completed,
press the FUNC (RETURN) button.
The display changes to the Equalizer mode
screen.
6
Creating Personal Equal-
izer Characteristic
Curves
You can create your own equalizer characteris-
tic curves. The following is the procedure.
Note:
The Parking Brake must be engaged to
access the Equalizer Adjustment mode
screen. Attempting to access this screen
while driving will display the warning-
CAN'T OPERATE WHILE DRIVING.
1
2 6
4 3 5
FLAT MALE FEMALE POPS ROCK NEWS
RETURN
RETURN