Tomlinson 10-4000 Series Napkin Dispensers - Manual

A Division of Tomlinson Industries • 13700 Broadway Ave. • Cleveland, OH 44125-1992
216/587-3400 • Fax: 216/587-0733
WARNING: DO NOT try to overfill the napkin dispenser. Attempting to force too
many napkins into dispenser may damage closure assembly.
Modular 10-4000 Series Napkin Dispensers
TO OPEN LID FOR LOADING:
1. Pull up on knob.
2. Swing lid down.
TO CLOSE LID AFTER LOADING:
1. Grasp knob with thumb and
forefinger.
2. Pull up on knob and push lid
forward until "click".
TO CLEAN DISPENSER:
1. Wipe dispenser with a nontoxic
cleaner and a soft cloth.
Back view
Front
view
Side view
Model A B C D E
C10 10" 6" 8 3/16" 5 3/8" 7"
25.4 cm 15.24cm 20.80cm 13.65 cm 17.78 cm
C24 24" 6" 8 3/16" 5 3/8" 7
60.96 cm 15.24 cm 20.80cm 13.65cm 17.78cm
©1996 Tomlinson Industries 5/97 Form 1908806 Printed in USA World Class, Worldwide
Our Napkin Dispensers are designed to accommodate horizontal fold napkins of a commercial size (13" x 13" or 13" x 17") that when folded, measure
4½" x 6½" (11.43 cm x 16.51 cm) to 5" x 6½" (12.7 cm x 16.51 cm). Model 10-4000-C10 holds approximately 250 napkins. The 10-4000-C24 holds about 500
napkins.
For drop-in counter model 10-4000-C10/C24, a 7 1 /
4
" x 5 3 /
8
" mounting hole is required. (See template on reverse). In-counter dispensers are equipped with spring clips
that hold the dispenser in place. For permanent installation, clips can be removed, use #10 SMS (not provided) to mount dispenser.