Tomlinson 509FC COUNTERTOP WARMER User Manual
Page 3
4
5
Getting to know your FUSION COMMERCIAL Countertop
Warmer
The FUSION COMMERCIAL Countertop Warmer combines high quality
construction and product features with smart design for excellent
performance.
Before Using for the first time
1 Remove all packaging materials, labels and literature.
2 In a well ventilated area, set appliance on a level, stable surface.
3 Plug power cord into grounded outlet.
4 Add one gallon (4 quarts) of hot water to heatwell (approximately 130°
F) and heat appliance for approximately 30 minutes on HIGH temperature
setting. (Note: It is normal that the appliance may release smoke and
odor during this initial heating).
5 Clean the appliance
a. Turn temperature to OFF and unplug appliance prior to cleaning
b. Allow appliance to cool, then empty any water from heatwell.
c. Do not immerse appliance in water
d. Clean with a clean damp cloth.
e. Do not use abrasive cleaners or pads as they can damage the
surface.
f. Mild cleaners and plastic scouring pads may be used if necessary.
To Operate your Countertop Warmer
1 Set appliance on level, stable surface and plug power cord into
grounded outlet.
2 Do not allow your customers to come in contact with any surfaces
labeled "CAUTION HOT".
3 For best results, operate the warmer WET (with water in heatwell) for
consistent food warming.
4 Add one gallon (4 quarts) hot water (approximately 130° F) to heatwell
and cover the warmer.
5 Set temperature control at HIGH setting for approximately 15 minutes.
6 Place full size or fractional steam table pans with preheated food into
heatwell.
7 Turn the control to lower setting depending on the amount or thickness
of the food.
8 Keep steam table pans and insets covered during operation to maintain
ideal serving temperature.
9 Carefully add hot water as necessary while the unit is in
operation.
10 Never pour water into dry heated heatwell. If the warmer
runs dry, turn it off and allow it to cool to room temperature
before adding hot water.
Power Capacity
Countertop Warmer operates at 120 volts, draws 10 amps and
processes 1200 watts of power.
1 Adjustable temperature control
2 Power on light (light goes on as soon as dial is moved from
OFF position)
3 Stainless steel interior and exterior
4 Heatwell
5 Heat release vents on sides and back
6 Skid resistant feet
3
4
6
2
1
5