Triton RL5000 X2 Series User Manual - Manual (Page 52)

C2
A PPENDIX C
Super Master Reset Password
BOTH types of electronic locks are now set with a Super Master Reset Password. The Super Master Reset
Password should only be used if the Manager Password has been lost/forgotten. Using the Super Master Re-
set Password will reset the lock back to factory state however once the Super Master Reset Password has been
changed from the factory default code, it CANNOT and WILL NOT change unless a hard reset of the lock is
performed.
*Upon arrival, the Super Master Reset Password combination of the lock is set at 5-5-5-5-5-5-5-5.
That is EIGHT number 5s.
Change this password IMMEDIATELY, before the Manager Default Code, or this function will be
permanently lost.
To Change the Super Master Reset Password (SMR):
1. Press and hold the ZERO (0) for three (3) seconds.
2. The lock will beep twice and the LED light will come ON (and stay ON until the process is complete).
3. Enter the default code of 5-5-5-5-5-5-5-5 holding the last digit for three (3) seconds.
4. The lock is now in Command Menu mode. SMR has two (2) Command Options:
- Press zero (0) to Change Code (one-time use ONLY).
- Press eight (8) to Reset the Manager Password (reset the lock).
5. TO BE CONTINUED - - - - - - - - - More info from La Gard needed
** IMPORTANT **
Read this page BEFORE proceeding. New imperative information.