Triton 9100 Installation Manual - Manual (Page 30)

30
M
ODEL
9100 I
NSTALLATION
M
ANUAL
1. Route the AC power cord and the phone (or Cat-5) cable through either the main or alternate cable
access hole (as applicable).
2. Connect the AC power cord and communication cable to their respective facility outlets.
3. Secure/plug the access holes with the grommet or plug provided.
Main cable
access hole
Power Outlet Accessibility
Whether you are installing a new AC socket outlet or plan to use an existing
outlet to supply power to the ATM, make sure the following requirements are
met:
1. The outlet is located near the equipment.
2. AC power for the terminal should come from a dedicated source with an
isolated ground. The ATM is designed to work on an IT (Isolated-Terra)
type power system having a phase-to-phase voltage not exceeding 240
volts.
3. The outlet is easily accessible and will not be blocked once the equip-
ment is installed.
R
OUTE
/ C
ONNECT
AC P
OWER AND
C
OMMUNICATION
L
INE