Triton 9670 Operation Manual - Manual (Page 116)

5-69
S
ECTION
5 - M
ANAGEMENT
F
UNCTIONS
T RITON S YSTEMS , I NC .
M
ULTI
-C
ASSETTE
C
ASH
D
ISPENSER
O
PERATION
M
ANUAL
M
ODELS
9650/9670
F
UNCTION
: TERMINAL OWNER
F
ACTORY
D
EFAULT
: NONE
A
CCESS
I
NSTRUCTIONS
:
1.) Select TERMINAL CONFIGURATION from the
MANAGEMENT FUNCTIONS menu.
2.) Select CHANGE MESSAGES.
3.) Select TERMINAL OWNER.
D
ESCRIPTION
:
The name of the TERMINAL OWNER is stored in the terminal and displayed to the customer in
the surcharge warning message. The name is entered directly into the terminal.
To enter a digit 0-9, simply press the key that has that digit. To enter a letter, first press the <BLUE>
key, then press the key that has the letter you want on it. The first press of the key will display the
first character above the number. Subsequent presses will display the characters in sequence.
When the character you want is displayed, press the <RIGHT ARROW> key to ‘lock in’ the letter.
If your next character is a letter, you must press the <BLUE> key again.
The name can be up to 18 characters long.
E
RROR
C
ONDITIONS
:
There are no error conditions directly associated with this function.