Rt2000 u, Accessing management functions – Triton RT2000 User Manual User Manual
Page 38
1 8
M
ODEL
RT2000 U
SER
M
ANUAL
Accessing Management Functions
1.
At the Customer screen (Figure 2-6), press and hold down the <CTRL> key;
while holding down the <CTRL> key, press the <1> key. Release both keys. The
password entry prompt appears. (Figure 2-7)
2.
At the password entry screen, enter the Master or Users password.
Fig. 2-6. Customer screen.
Fig. 2-7. Password entry dialog.
To access Management Functions, you must enter an appropriate password in the
dialog box that appears.
The password will consist of a 2-digit ID code and a password of 4-12 digits; for
example, 051234 could be a password entry consisting of an ID code of 05 and a
password of 1234. Press the Enter button to accept the password entry or Cancel to
exit.
When a valid password is entered, the Management Functions main menu will be
displayed, as shown in Figure 2-8:
Fig. 2-8. Management Function main menu