Universal Air Tools HP001 - Manual

HP001 Straight Standard Duty Needle Scaler
Page No 3 Dec 2004 Ver 1.01
Ref No Part No Description
1 615.3021 Cap (Valve)
2 809.0139 O'Ring (Valve Cap)
3 712.3022 Spring (Valve)
4 618.3022 Stem (Valve)
5 809.0089 O'Ring (Valve Seat)
6 424.1021 Valve Body
6a 423.1021 Valve Body Assembly
7 716.3021 Throttle Lever
8 813.0108 Roll Pin
9 612.1001 Piston
13 411.1002 Body
16 628.1051 Ring, Steal Intermediate
17 809.0249 O' Ring (Body)
24 610.1001 Anvil
25
601.1003 Needle Holder 3mm
601.1002 Needle Holder 2mm
26
412.1129 One Set of Flat Tip 2mm
Needles 29 per Set
413.1112 One Set of Flat Tip 3mm
Needles 12 per Set
413.2112 One Set of Chisel Tip
3mm Needles 12 per Set
413.3112 One Set of Pointed Tip
3mm Needles 12 per Set
403.1312
One Set of 3mm
Beryllium Copper Needles
12 per Set
Ref No Part No Description
27 712.1001 Compression Spring
28 416.1032 Intermediate Tube
29
417.1032 Straight Font Tube
418.1032 Round Front Tube
30 806.0825 Cap Head Screw
31 419.1241 Chisel Holder for 1/2"
Sq. Shank Chisel
32
704.1101
Chisel 1/2" Sq. Shank
Steel Straight 7" x 3/4"
Blade
704.1103
Chisel 1/2" Sq. Shank
Steel Straight 7" x 2
1/2" Blade
704.2105
Chisel 1/2" Sq. Shank
Steel Straight 7" x 1
3/8" Blade