USGlobalsat EB-5318RE - Manual (Page 9)

2012/8/31 9
Operation up to 400kbps
Individual transmit and receive FIFO lengths of
64B
■ The default I2C address values are:
Rx: 0x60
Tx: 0x62
Multi-master I2C mode is supported by default.
Dead reckoning applications support the DR
I2C interface. The I2C interface supports
required sensor instruments such as gyros,
accelerometers, compasses or other sensors
that can operate with an I2C bus.
DRI2C interface supports:
Typical data lengths (command + in/data out)
of several bytes
Standard I2C bus maximum data rate 400kbps
Minimum data rate 100kbps