USGlobalsat GH-625XT User Manual - Manual (Page 45)

GH-625XT
Page 45
(2) Connect the watch to your PC with the USB cable.
(3) Double click the GS-Sport Training GYM Pro' icon from the Desktop to start the
application.
(4) In the Menu Bar, go to Settings > Configuration. Click the  can COM Port" button.
The COM Port would be automatically scanned.
9.) Q: Why is the watch unable to receive a heart rate signal?
A: (1) Check if you are properly wearing the heart rate monitor. Also, spray some water on it
before use.
(2) Turn on the Heart Rate Alert function.
(3) If it is still not working, check the battery of the Heart Rate Monitor.
10.) Q: How to edit and upload waypoints through the software?
A: To Edit Waypoints, see steps below:
(1) From Track Records, select the training file that you want to browse.
(2) Click Waypoints in the function bar and you will see all the waypoints. Right-click on
one of the waypoints to edit its contents.
(3) Press the Save button when you're done.
To Upload Waypoints, refer to the procedures below:
(1) Select the waypoints that you want to transfer to the device.
(2) To upload, you can do this by going to Data Transmission > Way Points > Upload to
Device.
(3) In the watch, please enter CONFIGURATION > CONNECT TO PC.
(4) Afterwards, it should show that you successfully uploaded the waypoint into the
device.
11.) Q: What formats of the training file do the software supports?
A: It can save or open a training record as or from the following formats: .kml, .nmea, .gpx,
csv, and .txt.
To open a file, go to File > Open. Choose a certain file you want to open.
To save a file, select one training file you want to save. Go to File > Save. Choose a certain
file type you want to save it as.
12.) Q: How to import or export the training records from or to an activity file?
A: To import the training records from a specific file (.ACT):
Go to Main > Import Activity. Choose the file you want to import.
To export the training records to a specific file (.ACT):
Choose one training file you want to export. Go to Main > Export Activity > Activity Details.
Input additional note. Click OK.