USGlobalsat GH-561 User Manual - Manual (Page 12)

GH-561
Page 11
7.3 Stop GO TO function
1. If you would like to stop the go to function,
press the button. A window will pop up
asking you if you would like to ‘’EXIT
GOTO’’
2. Press the ‘’ YES’’ button.
3. The compass will stop the trip.
8. Calibration

If you would like to perform a compass calibration or the compass symbol is
blinking, you may perform a compass calibration by following these steps:
1. Pressing the and buttons
simultaneously will result in entering the
calibration display.
2. Follow the on screen steps to calibrate your
device. Rotate the device horizontally and
vertically as shown to the right. When the
“X, Y, and Z” icons are all lit, it means the
calibration has been completed.
3. After calibration has been completed a
confirmation window will pop-up asking to
confirm calibration. Please press to
return to the previous menu screen.