USGlobalsat DG-100 User Guide - Manual (Page 13)

DG-100 page 13
y Step 3: Select the Mode switch.
There are 3 default predefined modes,
including “Walk/Jog”, “Bicycle”, and
“Vehicle”. The data saving interval is 30
seconds for “Walk/Jog”, 10 seconds for
“Bicycle” and 5 seconds for “Vehicle”. You can change the different time or
distance interval in the Device Configuration window.
y Step 4: Select the Metric or Imperial unit.
y Step 5: Select the directory for exporting files.
y When you finished the setup, a
successful message appears and all
settings are saved in system.
4. The DG-100 utility will import the
setting you just made from
Configuration Wizard.
If you did not use Configuration
Wizard to do the settings, please
manually select the correct COM port
and set the Baud Rate to “115200”.
If later on you want to enable
Configuration Wizard again, please
click from menu bar, [File] > [Quick
Configuration].