American Standard Williamsburg Elite 5' Integral Apron Whirlpool 2425EC-LHO - Manual

WILLIAMSBURG ELITE™ 5’ INTEGRAL APRON
WHIRLPOOLS BY AMERICAN STANDARD
HIGH GLOSS ACRYLIC
WILLIAMSBURG ELITE™ 5’ INTEGRAL APRON
WHIRLPOOL
Comfortable bathing design with form-fitted
backrest and molded-in armrests
❏
2425E-LHO Left Hand Drain Outlet
(specify White 020, Bone 021, or Linen 222)
❏
2425E-RHO Right Hand Drain Outlet
(specify White 020, Bone 021, or Linen 222)
• Acrylic with fiberglass reinforcement
• Integral apron with removable access panel
• Integral three-sided, tiling / water retention
flange
• 1.5 HP self-draining pump/motor
with dry run seal
• Eight multi-directional and flow adjustable jets
including:
Two high performance Ideal-flow™ Jets
Six interchangeable Flex-jets™
• Two silent air volume controls
• Deck-mounted On/Off control
• Complete factory installed and tested
whirlpool system
❏
2425EC-LHO Left Hand Drain Outlet
(specify White 020, Bone 021, or Linen 222)
❏
2425EC-RHO Right Hand Drain Outlet
(specify White 020, Bone 021, or Linen 222)
• Same as above with the StayClean™
whirlpool system featuring Antimicrobial
AlphaSan®
Nominal Dimensions:
60” x 32” x 21-1/2”
(1524 x 813 x 546mm)
© 2003 American Standard Inc.
HD-016
SPS 2425E-LHO/RHO
Revised 6/03
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• Underwriters Laboratories - Hydromassage
Bathtubs UL 1795
• ASME A112.19.7M for Whirlpool Appliances
• ANSI Z124.1 for Plastic Bathtubs
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density
* See American Standard Faucet Selector
NOTE: Roughing-in dimensions and product
specifications shown on reverse side of page.
Components Needed:
❏ Bath Filler*: (specify finish)
❏ Bath Drain: BATH-DRAIN
(specify Chrome 002, Polished Brass 099,
or Satin 295)
Custom Accessories Available:
❏ Pulse Jet Kit: PULSE-JET (two per kit, specify
White 020, Bone 021, or Linen 222)
❏ Soft Jet Kit: SOFT-JET (two per kit, specify
White 020, Bone 021, or Linen 222)
❏ E-Z-Install™ Whirlpool Heater - EZHEAT-100
NOTE: E-Z-Install™ Whirlpool Heater is designed to
maintain water temperature during operation. It will not
heat cold water to desired bathing temperature.