Unpacking – WEN 3710 10 inch Table Saw ver.2010 User Manual
Page 11
11
Unpacking
WARNING - to prevent accidental starting that could cause possible serious personal injury;
assemble all parts to your saw before connecting it to power supply. Saw should never be
connected to power supply when you are assembling parts, making adjustments, installing or
removing blades, or when not in use.
WARNING - if any parts are missing, do not operate this tool until the missing parts are
replaced. Failure to do so could result in possible serious personal injury.
Do not discard the packing materials until you have carefully inspected the saw, identified all parts,
and satisfactorily operated your new saw.
NOTE: if any parts are damaged or missing, do not attempt to plug in the power cord and turn the
switch on until the damaged or missing parts are obtained and are installed correctly.
Item Description
Qty
Item Description
Qty
1
Table Saw
1
9
Push Stick
1
2
Miter gauge
1
10
Long Top Plate
2
3
Rip Fence
1
11
Short Top Plate
2
4
Wheel Handle
1
12
Long Support Plate
2
5
Blade Guard
1
13
Short Support Plate
2
6
Blade Wrench
2
14
Leg
4
7
Anti-kickback Device
1
15
Rubber Foot
4
8
Table Insert
2
Hardware Bag (not shown)
1