WEN 49112 Apex Pro 12V Lithium Ion Drill/Driver - Manual (Page 7)

ADJUSTABLE TORQUE
The drill has a 17+1position clutch.
TWO-SPEED GEAR BOX
The two-speed gear box is designed for drilling or driving at LOW or HIGH speeds. A slide switch is located on top
of your drill for selecting the appropriate speed.
VARIABLE SPEED
The variable-speed trigger switch delivers higher speed with increased pressure and lower speed with decreased
trigger pressure.
KEYLESS CHUCK
The keyless chuck allows you to hand-tighten or release the drill bit in the chuck jaws.
FORWARD/REVERSE/CENTER LOCK
The direction-of-rotation selector located above the trigger switch changes the direction of bit rotation. Setting the
trigger switch in the OFF (center lock) position helps to reduce the possibility of accidental starting when not in use.
LED WORK LIGHT
Pressing the trigger switch illuminates the LED worklight, located on the front of the Drill Driver. This feature
provides extra light for increased visibility.
OPERATION
CHARGING THE BATTERY
WARNING: The charger and battery pack are specifically designed to work together so do not attempt to use any
other devices. Never insert or allow metallic objects into your charger or battery pack connections because an
electrical failure and hazard will occur.
Your battery pack is UNCHARGED and you must charge once before use. The charger is designed to use standard
household 120volt 60Hz power.
1. Plug the charger adapter into a suitable power supply. The red light will illuminate. Insert the battery pack into
the charger base. The green light will come on and the red light will remain on.
2. A discharged battery at normal ambient temperature will take approximately 3-5 hours to reach full charge.
When charging is complete, the red light will turn off and only the green light will be illuminated.
BATTERY AND CHARGER SAFETY FEATURES
OVER CHARGING PROTECTION
The over charging protection will ensure that the battery is never overcharged. When the battery has reached its fully
charge capacity, the charger will automatic shut off, protecting the internal components of the battery from being
damaged.
OVER DISCHARGE PROTECTION
An internal component of the battery pack is an over discharge protector. This feature will stop the battery from
discharging beyond the recommended lowest safety voltage.
OVER HEAT PROTECTION
7