Acura 08B21SJA_200081 - Manual (Page 13)

© 2005 American Honda Motor Co., Inc. - All Rights Reserved.
13
Troubleshooting
Symptom Probable cause Remedy
No picture reflected in the monitor
screen. Gearshift lever not in the “R”
position Check that the gearshift lever is in the “R” position.
Blown fuse
Replace the fuse with the fuse of the specified
capacity.
Poor reflection of the picture Drops of water (rain), snow or mud
on the cover in front of the lens. Wipe the cover lightly with a moist soft cloth.
Drive the vehicle carefully while checking for safety
behind the vehicle with your eyes.
Difference of color between the
picture and actual subject Near infrared radiation range used
for higher sensitivity of the camera This is not a problem.
White vertical band of the light in
the picture • When the camera directly catches
the strong light such as the
sunlight, headlight beam, etc.
• When the camera directly catches
the strong light such as the
sunlight, etc. reflected by the
vehicle body or a part near the
vehicle.
This phenomenon is not a problem but characteristic
to the CCD camera is not a problem.
Drive the vehicle carefully while checking for safety
behind the vehicle with your eyes.
Error between the distance judged
with the guide lines on the monitor
screen and actual distance on road
or actual distance to the objection Guide line positions change
according to the vehicle condition
(number of passengers and load)
and environmental condition. Drive the vehicle carefully while checking for safety
behind the vehicle with your eyes.
Camera out of the installation
position or out of the angle. Consult with your authorized Acura dealer.