Avaya 5620 - Manual (Page 20)

5620user
4620/5620 Phone User Guide Page 20
IP Office Issue 2d (15th September 2005)
View IP Settings
Views of telephone and system information are available from this screen. A user normally does not
need to view this information, however your System Administrator may ask you to report certain values
from any of the status screens in the event of problems.
The status screen data can be viewed, but cannot be changed.
1. Press Option) and then select View IP Settings.
2. There are two pages of display. Use and select from:
• IP Address Settings
IP (Internet Protocol) address information identifies certain components and connections. The IP
Address information includes the location (address) of your phone on the IP Office unit, the
location and port (connection) of the IP Office itself, the call routing and mask addresses, and the
identification of the File Server with which your telephone interacts. Although technical in nature,
having this information available and knowing how to get to it can assist your System
Administrator in tracking questions about or problems with phone functions or connections.
• Quality of Service (QoS) Information
QoS refers to a number of mechanisms used to improve audio quality over the network.
• Phone Interface
Your phone interfaces with several system hardware devices and software. This screen provides
information about three of the main interfaces.
• Miscellaneous Information
The miscellaneous status screens provide additional information about your telephone and its
connections.
3. To return to the first View IP Settings screen, press Return.
Contrast Control
On first-time startup, the phone's display area contrast is set to a mid-level. Should you need to adjust it
to better suit your work environment and lighting, 15 contrast levels are available.
NOTE: You may not be able to distinguish between all 15 contrast level settings. Some of the upper
and/or some of the lower contrast level settings may appear identical to adjacent settings. This is normal.
To adjust the contrast level:
1. Press Option) and then select Contrast Control.
2. To adjust the contrast, use or until you reach the desired contrast level. ( symbols provide
visual confirmation of the current level.)
3. Save the contrast level you set by pressing the Save, or, to restore the previous setting
without changing the contrast, press the Cancel.