Additel 222A Multifunction Process Calibrator Datasheet User Manual

Multifunction process calibrator additel 222a

Advertising
background image

Pressure / Process Calibration Equipment

Additel Datasheet 2014 / 2015

Corporate Headquarters

22865 Savi Ranch Parkway Ste F

Yorba Linda, CA 92887, USA

Salt Lake City Office

802 Bamberger Dr, Suite C

American Fork, UT 84003, USA

Phone: 714-998-6899

Fax: 714-998-6999

Email: [email protected]

Phone: 801-756-5570

Fax: 714-998-6999

Email: [email protected]

Sourcing, simulating and measuring pressure,

temperature and electrical signals
Smartphone-like menu and interface make the

operation simple
The internal cold junction compensation sensor can

be re-calibrated at ice point by users
Ultra-compact, 3.9" x 7.6" x 2.0", and 1.6 lb (0.7 kg)

OVERVIEW

A highly integrated multifunction calibrator featuring several patented technologies. The 222A is an ultra-compact,

rugged, and easy to use hand-held device for sourcing, simulating and measuring pressure, temperature, and electrical

signals. Its smartphone-like menu and interface make the operation simple. The 222A is ideal for calibrating, maintaining,

and troubleshooting process instrumentation. Automation and documentation capabilities make the 222A a turnkey

solution.

Sourcing, simulating and measuring pressure, temperature and
electrical signals
Sources and measures mV, mA, ohms, RTDs,

thermocouples, frequency, and pulses

Simulates and measures 13 thermocouples, 11RTDs,

and pressure to calibrate transmitters

Measures and sources pressure using Additel 160 series

Intelligent Digital Pressure Modules from -15 psi to

10,000 psi (-1 bar to 700 bar)

24V loop power supply

Simultaneous dual reading capability

Automatic switch test

Supports square root transmitter

Pulse frequency output for the calibration of flow totalizer

Easy to use
Smartphone-like menu and interface make the operation

simpler and easier

Ultra-compact, size 3.9" x 7.6" x 2.0" (100mm x 192mm

x 52mm), and weight 1.6 lb (0.7 kg)

One hand operation

Calibrated cold junction compensation (Patented)
Cold junction equivalent block in the calibrator

A calibrated PRT element with flexible leads is installed

in the equivalent block for thermocouple cold junction

compensation

This PRT element can be pulled out from the calibrator

and re-calibrated and corrected at ice point by users

Built-in temperature readout
CVD coefficients of a calibrated PRT can be input into

the calibrator for accurate temperature measurement.

Multi lingual interface
English, German, French, Italian, Spanish, Portuguese,

Simplified Chinese(Traditional Chinese, Japanese and

Russian are available per request)

Documenting and automated procedure capability
Manage the information of the device under test

Set up automated calibration procedures, and the

Additel 222A performs the test, calculates the errors,

displays and/or stores the results in the memory, and

highlights the out-of-tolerance points.

As-found and As-left functions allow recording and

documenting results for quality control.

Download tasks and upload the results

Snapshots allow you to capture and save work.

Build-in unit conversion tool
Build-in converters for pressure units, temperature

units, temperature vs. resistance (RTDs), and

temperature vs. millivolt (thermocouples)

Display
3.5 inch TFT color screen

Rugged
Rugged design for harsh environments.

Passed a 1-meter drop test

Three year warranty for the ADT222A, and one year

for the battery pack

Misuse protection
Up to 30V voltage on any two sockets and up to

1A current on current sockets will not damage the

calibrator. The calibrator will return to normal condition

as soon as the voltage or current is removed.

Rechargeable battery
Rechargeable Li-ion battery for 15 hours uninterrupted

use.

Battery life will be reduced when 24V is applied

The rechargeable battery is replaceable.

NIST Traceable Calibration with data
Warranty:
3 years

FEATURES

Multifunction Process Calibrator

Additel 222A

Advertising