Additel 12X series pressure manifolds Datasheet - Manual

Pressure / Process Calibration Equipment
Additel Datasheet 2014 / 2015
Corporate Headquarters
22865 Savi Ranch Parkway Ste F
Yorba Linda, CA 92887, USA
Salt Lake City Office
802 Bamberger Dr, Suite C
American Fork, UT 84003, USA
Phone: 714-998-6899
Fax: 714-998-6999
Email: [email protected]
Phone: 801-756-5570
Fax: 714-998-6999
Email: [email protected]
The 12X series pressure manifolds are designed for expanding pressure test ports during pressure calibration. The
Additel 121 pressure manifold is used for pneumatic pressure calibration up to 3,000 psi (200bar), while the Additel 123
manifolds is compatible to hydraulic pressure applications up to 15,000 psi (1,000 bar). A filter is built-in with the 121
pneumatic pressure manifold to prevent contamination introduced by devices under test. There are four hand-tight quick
connectors pre-installed on each manifold. Additel 12X series pressure manifolds allow you to connect without the use
of wrenches or Teflon tape which increases your productivity when using calibration pumps, pressure controllers, dead
weight testers, or piston gauges.
Model Description
ADT121-N 1/4NPT male hose to four 1/4NPT female hand-tight quick connectors
ADT121-N2 1/2NPT male hose to four 1/2NPT female hand-tight quick connectors
ADT121-M M20×1.5 male hose to four M20×1.5 female hand-tight quick connectors
ADT121-B 1/4BSP male hose to four 1/4BSP female hand-tight quick connectors
Model Description
ADT123-N 1/4NPT male hose to four 1/4NPT female hand-tight quick connectors
ADT123-N2 1/2NPT male hose to four 1/2NPT female hand-tight quick connectors
ADT123-M M20×1.5 male hose to four M20×1.5 female hand-tight quick connectors
ADT123-B 1/4BSP male hose to four 1/4BSP female hand-tight quick connectors
Pressure Manifolds
Note: A test hose is included with every Additel 12X pressure manifold.
121 series Pressure Manifolds
123 series Pressure Manifolds
Additel 12X Series
Pneumatic, -15 psi to 3,000 psi (-1 to 200 bar)
Hydraulic, -15 to 15,000 psi (-1 to 1,000 bar)