Additel LogII Wireless User Manual - Manual (Page 4)

4 / 12
 Windows Installer 3.1
 Windows Imaging Component
 Microsoft .NET Framework 4
Third, The Wizard interface will appear as shown in below picture. Users can finish the
installation by following this Wizard.
Figure 1-1
When the installation is finished, the following icon will be shown on the desktop. As below
picture 1-2.
Figure 1-2
If your computer could not check out the Wireless Master, please installing the WMD970
driver for the Wireless Master which can be found in the installation CD ‘Tools\WMD970
Driver’ folder.