American Weigh Scales XP-600 - Manual (Page 3)

This scale has been calibrated before shipment, how-
ever accuracy may be affected by variations of gravity,
shipment, handling, and changes in temperature.
OPERATION
1. Place the scale on a flat surface and press the
ON/OFF key ( )
2. Wait until the scale displays “0.0” or “0.00”.
3. Place the item(s) to be weighed on the platform
4. Press the Unit Selection Key ( ) to switch
between weighing units.
TARE WEIGHING
1. Turn the scale on as described above.
2. Place the “tare item” onto the platform.
3. Press the TARE key ( ) and the scale display
will reset to zero.
4. Add the “net-weight-item”.
CALIBRATION
XP-60 : 50 Gram Calibration Weight
XP-600 : 500 Gram Calibration Weight
(weight not included)
1. With the scale ON, press and hold the Calibration
Key ( ) until the display shows “CAL”.
2. The display will flash “0.0” or “0.00”. Press the “Cal”
Key again.
3. The display will now flash the required calibration
weight value. Place the required weight (see above)
onto the platform and press the “Cal” Key one last
time.