Aposonic A-S1604R4 - Manual (Page 26)

25
B. NORMAL RECORD PPS
Press into SET to change the IPS in normal recording. User can click
“AVERAGE” to set PPS automatically by system or change the IPS for each channel
manually.
C. ALARM RECORD PPS
Press into SET to change the IPS in normal recording. User can click
“AVERAGE” to set PPS automatically by system or change the IPS for each channel
manually.
D. ALARM RECORD DURATION
Press ◄ or ► to set dwell time of alarm recording.
E. RECORD QUALITY
Press into SET to switch image quality of each channel. User can use mouse
wheel to change the image quality of each single channel: LOW/ MEDIUM/ HIGH/
BEST, or use “AVERAGE” to switch the image quality of all channels at once.
F. RECORD MODE
Press ◄ or ► to switch record mode to ALWAYS/ MOTION/ SCHEDULE / OFF.
G. AUDIO RECORD
Press ◄ or ► to switch AUDIO RECORD ON or OFF.