Reporting bugs – Avigilon ACC Core Version 5.2.2 User Manual
Page 107
To access the Web Client, you need the IP address and port number of the server in your Site. The IP address is
listed in the server's Setup tab in the AvigilonControl Center Client. The port number can be found in the Admin
Tool under Settings > Network.
1. To access the Web Client, open Internet Explorer (version 6+) and enter the address of your Web Client in
the following format:
http://<server ip address>:<port number>/
(For example, http://192.168.2.62:38880/)
If you have not accessed the Web Client before, you may be prompted to install the required plug-in
software before the Web Client will open.
2. When the login screen appears, enter your username and password for the Site.
The Web Client will open in your browser, and you can access the video and cameras that are connected to the
server.
Figure 69:
Avigilon Control Center Web Client
Reporting Bugs
If an error occurs in the Avigilon Control Center, you can contact Avigilon Technical Support at
Reporting Bugs
107