Avigilon ACC Mobile Version 1.4.0.2 for iOS - Manual (Page 5)

Getting Started
Once you’ve downloaded and installed the Control Center Mobile app, you can access the software by tapping
the app icon on your Home screen.
Before you can watch video in the app, you need to set up the Control Center Mobile app to communicate with
your Avigilon Control Center system.
Adding a Gateway
When you open the app for the first time, you are automatically taken to the Settings screen.
Notice that beside Gateways is the number 0. You must add at least one Control Center Gateway. The Gateway
is required to link your mobile device to your Avigilon Control Center system.
Ask your System Administrator for the Gateway’s IP address and port number.
A username and password is required to access the Gateway and will be provided by your System
Administrator. This may be different from the username and password used to access Sites in the Avigilon
Control Center system.
NOTE: The default Gateway username is operator with no password.
Getting Started 2