View avigilon image data and events in gallagher, Configuring cameras, Assigning logical ids to cameras – Avigilon Gallagher Command Center 7 Integration User Manual
Page 14
Avigilon Control Center 5 System Integration Guide with Gallagher Command Centre
10
View Avigilon Image Data and Events
in Gallagher
Gallagher can be configured to view live and recorded video from Avigilon cameras, and
receive Avigilon events. Gallagher associates recorded video with specific alarms, so you
must configure an action plan in Gallagher before you can review recorded video in
Gallagher.
Configuring Cameras
Before Avigilon cameras can be viewed in the Gallagher Command Centre, the cameras
must be added to the Gallagher Command Centre software. Complete the following
procedures:
Assigning Logical IDs to Cameras
In the Avigilon Control Center Client software, assign a logical ID to each camera. The
Command Centre software will only detect cameras with a logical ID. By default, cameras
do not have a logical ID.
1.
In the Avigilon Control Center Client software, right-click a camera in the
System Explorer and select Setup.
2.
In the camera Setup tab, click General.
3.
In the General settings dialog box, enter a Logical ID for the camera.
The logical ID must be unique number.