Onguard configuration, Adding avigilon servers – Avigilon Lenel OnGuard Video & Event Viewer Integration User Manual
Page 9
Avigilon Control Center 5 System Integration Guide with Lenel OnGuard
6
OnGuard Configuration
After the Avigilon cameras have been configured for use in the OnGuard software,
configure OnGuard to interact with the Avigilon Control Center servers and add the
Avigilon cameras into the OnGuard software.
Adding Avigilon Servers
1.
Open the OnGuard System Administration software.
2.
Select Video > Digital Video.
3.
Select the Video Recorder tab.
4.
Select Add to configure a new server.
5.
In the Name field, enter a name for the server.
6.
In the Video Recorder Type drop down list, select Avigilon Control Center.
7.
In the Workstation field, enter the name of the OnGuard server running the
communications server.
8.
In the Use IP Address of Video Recorder field, enter the Avigilon server IP
address.
Make sure you enter the IP address of the Avigilon Control Center Server that
the integration license is installed on or the integration will not work.
9.
In the Port field, enter the Avigilon server port number.