Servers, Client, Checking the license in avigilon – Avigilon Software House CCURE 9000 Integration User Manual
Page 7: Checking the license in c•cure
Avigilon Control Center 5 System Integration with Software House C•Cure 9000
4
Servers
Install the following on any server in your network.
•
C•Cure server software
•
Avigilon Control Center 5.0 Server software
o
One Avigilon Control Center Server in the Site must have the
integration license.
Client
•
Install the C•Cure client software on any workstation that requires access to
the C•Cure system.
Checking the License in Avigilon
After you have installed all the required software, check that the Avigilon Third Party
Integration license was properly applied.
1.
Open the Avigilon Control Center Admin Tool.
2.
Select the Settings tab and click Licensing. The License Activation dialog box
appears.
The dialog box must say Integration Connections: Yes or the software was not
properly licensed.
Checking the License in C•Cure
1.
In the C•Cure Administration Station or the C•Cure Monitoring Station, select
Help > About.
2.
In the About C•Cure dialog box, select the License tab.
3.
In the Options list, check that Avigilon Control Center is listed.