AW Gear Meters HPM-SLG Series - Manual (Page 2)

AW Gear Meters 8809 Industrial Drive, Franksville, WI 53126  web: www.awgearmeters.com
 Tel: 262-884-9800  Fax: 262-884-9810  Email: [email protected]
REV. 05/24/12 HPM-SLG.DOC
Cross Reference Guide for HPM-SLG Spare Parts
1 - Lower Housing (303 Stainless Steel)*
Pt. # LH-SLG
2 - Tungsten Carbide Shafts. (Not removable - no spare part
listed)
3 - Tool Steel Locating Pins
Pt. # LP-SLG
4 - Stainless Steel Gear with Carbide Insert.
Pt. # GR-15
5 - PTFE Gasket - Pt. # COT-SLG
6 - Upper Housing (303 Stainless Steel)*
Pt. UH-SLG
7 - HEX Socket Cap Screw - 5mm
Pt. # SC-SLG
Optional Accessories are available as follows:
8 - Mounting Bracket includes mounting bolts and grounding
terminal (303 Stainless Steel)
Pt. # BK-1
9 - Tube fitting assembly:
OD tube to
” BSPP Male- Stainless Steel
Pt. # BSP-SLG (4 part assembly)
10 - Washer & O-Ring Assembly
Pt. # WAL-SLG
11 - PTFE Spacer - 6mm I.D.
Pt. # TSF-SLG
Items 9, 10 & 11 are available as a combined assembly under
Pt # SLG-ALY
* - A special 316TI alloy is available and is designated as:
Part-HPM-15SLG-TI