AW Gear Meters PROSCAN - Manual (Page 5)

ProScan In-Line Process Sensor
User Manual
4
Quick Setup Guide
As with any precision-engineered device, always use the ProScan In-Line Process Sensor in accordance
with the manufacturer’s instructions.
Choose Location
The best location to install the ProScan sensor is to a tee or saddle in the process line.
Install Electrical Connection
Attach the five-pin electrical cable to the sensor and tighten the threaded cord grip (see Figure 1, page
8).
Position Sensor
Install the sensor vertically in the process line, preferably with the electrical connection facing the floor
(see Figure 2, page 14).
Connect
Connect the opposite end of the electrical cable to PLC, DCS, or data logger (see Figure 1, page 8).
In the following manual, you will find complete connection, operating, set-up, and maintenance
instructions.
Caution
Notice