Catskill Craftsmen 72265 - Manual (Page 7)

Step 4
Attach Hardware and Drop Leaves to Top
A. Place the top and 2 drop leaves upside down on a flat surface. Install hinges using
5/8” #6 screws. Fasten the Drop Leaf supports using 5/8” (16mm) #8 screws. Loosley
attach the “Z” brackets to the set of holes near the back edge of the cart top with 5/8”
(16mm) #8 screws. (Use the set of holes that are further apart than those on the front
edge.) The “Z” brackets will be tightened when the top is attached to the cart in the next
step.
Step 5
Attach Top to Cart
A. Invert the Cart Base and position onto
the Cart top. Fit the “Z” brackets into the
slot across the top back brace. Align the
holes in the top front brace with the the
pilot holes at the front of the cart top.
Attach the top front brace to the cart top
with 1-3/4” (44mm) #8 Wood Screws.
Tighten the “Z” brackets to complete top
attachment.