DeFelsko PosiTector UTG v.3.1 Full Manual - Manual (Page 29)

26
PosiSoft solutions for viewing, analyzing and reporting data:
PosiSoft USB Drive - connect the
PosiTector to a PC/Mac using the
supplied USB cable to access and print
stored readings, graphs, photos, notes
and screen captures. No software or
internet connection required. USB Drive
must be selected (See pg. 29).
PosiSoft.net - a free web-based application offering secure
centralized storage of PosiTector readings. Access your data from
any web connected device. Go to: www.PosiSoft.net
PosiSoft 3.0 - Desktop Software for downloading, viewing and
printing your measurement data.
PosiSoft Mobile (Advanced models only) - access readings, graphs,
capture photos and update annotations through WiFi enabled
devices, such as tablets, smart phones and computers.
Accessing Stored Measurement Data Accessing Stored Measurement Data
PosiSoft Desktop Manager (PDM):
A small Windows based application which allows automatic two-
way communication (synchronization) between the Gage and
PosiSoft.net (internet connection required). When installed, PDM
runs as a start-up application and resides in the Windows
notification area (system tray) of a PC. PDM is available as a free
download within your PosiSoft.net account or at
www.defelsko.com/downloads
Register your Gage on PosiSoft.net to take full advantage of your
Gage’s capabilities. See www.PosiSoft.net
PDM is not required for WiFi enabled gages (pg. 32). NOTE: