Edwards Signaling Genesis Ceiling Horn-Strobe - Manual (Page 4)

4 / 4 P/N 3100616 • REV 05 • REB 30JAN13
Specifications
Voltage Regulated 24 VDC, 24 VFWR
Strobe operating
current See Table 3
Light output Selectable at 15, 30, 75, and 95 cd
Sound level output See Table 4
Default settings
Signal
Sound level
output
Strobe signal
output
Temporal
High dB
1 flash per second (fps)
Wire size 12 to 18 AWG (0.75 TO 2.50 mm²)
Compatible electrical
boxes North American 4 in. square electrical box,
2-1/8 in. deep (no extension ring)
Operating environment
Temperature
Relative humidity
32 to 120°F (0 to 49°C)
0 to 93% noncondensing
Regulatory information
Manufacturer Edwards, A Division of UTC Fire & Security
Americas Corporation, Inc.
8985 Town Center Parkway, Bradenton, FL
34202, USA
Year of
manufacture The first two digits of the DATE MFG number
(located on the product identification label) are
the year of manufacture
UL/ULC rating Regulated 24 DC and 24 FWR
This device was tested to the regulated
24 DC/FWR operating voltage limits of 16 V and
33 V. Do not apply 80% and 110% of these
values for system operation.
Environmental
class UL: Indoor
Synchronization Meets UL 1971 requirements. Maximum allowed
resistance between any two devices is 20
Ω.
Refer to specifications for the synchronization
control module, this strobe, and the control panel
to determine allowed wire resistance.
Agency listings Meets ULC-S525, ULC-S526
UL 464, UL 1638, and UL 1971
Contact information
For contact information, see www.edwardsutcfs.com.