Edwards Signaling Genesis Speaker Strobe - Manual (Page 2)

2 / 4 P/N 3100273 • REV 07 • REB 30JAN13
Figure 1: Field-configurable switches
1. Candela switch
2. Indicator
3. Wattage switch
4. Bottom
Figure 2: Strobe settings
1. JP1: Strobe signal output: Cut to change from 1 flash per second
(public mode) to temporal (private mode)
Note: If the strobe is set to temporal (private mode), this
device is no longer UL 1971 or ULC-S526 Listed or FM
Approved but is UL 1638 Listed.
Figure 3: UL 1971 minimum light output (% of rating vs. angle)
1. Percentage of candela horizontal spec.
2. Percentage of candela vertical spec.
Figure 4: Mounting diagram