Edwards Signaling SA-TRIM2 - Manual

© 2013 UTC Fire & Security. All rights reserved. 1 / 2 P/N 3101562 • REV 02 • REB 28JAN13
SA-TRIM1 and SA-TRIM2 Trim Kit
Installation Sheet
Description
The SA-TRIM1 and SA-TRIM2 trim kits are used to semiflush
mount the cabinet box (see Figure 1). The two models are
described in the table below.
Model Description
SA-TRIM1 Trim ring kit for 64 point control panels
SA-TRIM2 Trim ring kit for 127/254 point and 250/500 point
control panels
Installation
Remove the 1/4-inch knockouts in the cabinet box and then
attach the trim ring kit to the cabinet box as shown in Figure 2
using the hardware provided.
Note: You must attach the trim ring kit before placing the
cabinet box in the wall.
Figure 1: Semiflush mounting the cabinet box
Trim ring
Wall
Cabinet box
Figure 2: Trim kit installation
#6-32 K-nuts