Edwards Signaling 869D-G1 - Manual

P/N 3100286 ISSUE 2 © 2002
Installation Instructions for 869D-G1 Series
Diode Polarized Electronic Horn Signal Appliance
Description Description Description Description Description
The horns are UL and cUL Listed, high quality signals in-
tended for indoor or outdoor use. It is recommended
that these products be installed in accordance with the
requirements in the latest edition of national and local
electrical codes. For outdoor use, the horns must be in-
stalled with a weatherproof backbox.
It is recommended that these products be installed in
accordance with the requirements in the latest edition of
national and local electrical codes.
See Table 2 and Figure 1 for specifications.
CHESHIRE, CT 203-699-3300 FAX 203-699-3365 (CUST. SERV.) 203-699-3078 (TECH SERV.)
WARNING WARNING WARNING WARNING WARNING
To reduce the risk of shock, always disconnect all power
before handling the unit.
Installation Installation Installation Installation Installation
Figure 1. Detailed View
1. Select mounting method as detailed in Figure 1 and
install the electrical box (not supplied) using suitable
hardware.
a. For outdoor applications, install the weatherproof
box (ordered separately) using four #10 x 1 1/4"
(32 mm) screws and cap lugs provided in the
enclosed parts bag.
NOTE: Be sure hook flange is facing outward as shown
in Figure 1.
NOTE: The designation "TOP" on boxes denotes
orientation of box after installation.
2. Attach mounting plate using two #8-32 screws
provided with the surface box (ordered separately) or
four #8-32 screws provided with the weatherproof box
(ordered separately). The flush box uses two #8-32
screws (not provided).
3. Bring signaling circuit field wiring into electrical box.
Table 1. Electronic Horns
Catalog
Description Number
Horn, Gray, Flush or Panel Mount, Indoor 869D-G1
Indoor