Avenview SW-HDSDI-8X1 - Manual (Page 4)

www.avenview.com 4
1.3 Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed
to provide reasonable protection against harmful interference in a residential installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this
equipment.
1.4 Introduction
Avenview SW-HDSDI-8X1, 8 Port HD/SD-SDI Switch receives, equalizes 8 SDI inputs, perfectly switches the
desired input to SDI equipped monitors or receivers. The switch supports both HD/SD-SDI bit rates, and the
re-transmits video signal without degradation. Through RS-232, IR remote, or front panel push button, the
control of the SDI switch becomes versatile and easier. SW-HDSDI-8X1 offers the most convenient and cost
effective means for swift switch and duplication of high quality SDI in the market.
- HD/SD-SDI Switch
- 8 equalized SDI inputs
- Dual color LED indication of HD/SD of the output SDI
- Automatic detection of the SDI input
- SYNC IN/OUT
- Low cost 8X1 HD/SD (dual rate) Switch with Dual Outputs (Splitter)
- Provides the equalized transmission path up to 300m (1000 feet) for HD cases
- Multiple control by RS232, IR remote, and push button
1.5 Package Contents
Before you start the installation of the converter, please check the package contents.
- SW-HDSDI-8X1 x 1
- Power Adapter (+5VDC) x 1
- IR Remote Control x 1
- User’s Manual x 1