Fire-Lite CRF-300 Relay Control Module User Manual
Page 2
WARNING
All relay switch contacts are shipped as shown in Figure 3, but may have transferred during shipping. To ensure that the switch con-
tacts are in their correct state, modules must be made to communicate with the panel before connecting circuits controlled by the mod-
ule.
Relay Contact Ratings:
Figure 3. Relay module wiring diagram:
A78-2286-10
F300-04-00
2
I56-1190-01
©1999 Fire•Lite Alarms, Inc.
CURRENT RATING
MAXIMUM VOLTAGE
LOAD DESCRIPTION
APPLICATION
3 A
2 A
.9 A
.9 A
.5 A
1 A
.5 A
30 VDC
30 VDC
110 VDC
125 VAC
30 VDC
30 VDC
125 VAC
Resistive
Resistive
Resistive
Resistive
Inductive (L/R=5ms)
Inductive (L/R=2ms)
Inductive (PF=.35)
Non Coded
Coded
Non Coded
Non Coded
Coded
Coded
Non Coded
.7 A
75 VAC
Inductive (PF=.35)
Non Coded
IF ANY WIRING TO TERMINALS 3 – 9 IS NONPOWER
LIMITED, THE CB500 BARRIER IS REQUIRED. THE CB500
INCLUDES A NONPOWER LIMITED LABEL, WHICH MUST
BE PLACED OVER THE POWER LIMITED TERMINAL
INFORMATION ON THE NAMEPLATE LABEL.
MODULE
FROM PANEL OR
(+)
(—
)
TO NEXT
(+)
(—
)
DEVICE
(+)
(—
)
CONTROL
CONNECT MODULES TO LISTED COMPATIBLE
RELAY COMMON 1
RELAY COMMON 2
NORMALLY CLOSED 1
NORMALLY OPEN 2
NORMALLY CLOSED 2
MODULE DOES NOT SUPERVISE CONTROLLED CIRCUITS
NORMALLY OPEN 1
FIRE LITE CONTROL PANELS ONLY
PREVIOUS DEVICE
COMMUNICATION LINE
32 VDC Max.
SHIELDED-TWISTED PAIR
IS RECOMMENDED
9
8
7
6
5
4
3
2
1
0
ADDRESS
LOOP