Fire-Lite CMP-2402B Addendum Testing FACP - Manual

The CMP-2401B/CMP-2402B FACP (Fire Alarm Control Panel) is factory configured with
the Signal Silence Inhibit feature enabled. This feature prevents the silencing of notifica-
tion appliances and resetting of the FACP for 60 seconds after alarm activation. The Alarm
Relay is also configured to transfer on any alarm condition.
Disabling the Signal Silence Inhibit Feature
The Signal Silence Inhibit feature may be disabled, with the approval of the Local Authority Having Jurisdiction,
by removing Jumper JP2 from the FACP main circuit board (refer to the illustration below). When testing the
FACP, it is advisable to temporarily disable the Signal Silence Inhibit feature to allow for immediate silencing of
the Notification Appliance Circuit while the system is being tested.
Disabling the Alarm Relay
The Alarm Relay may be disabled, with the approval of the Local Authority Having Jurisdiction, by removing
Jumper JP3 from the FACP main circuit board (refer to the illustration below). When testing the FACP alarm
circuit(s), it is advisable to temporarily disable the Alarm Relay to prevent activation of circuits connected to the
relay contacts.
CMP-2401B/CMP-2402B CMP-2401B/CMP-2402B CMP-2401B/CMP-2402B CMP-2401B/CMP-2402B CMP-2401B/CMP-2402B
Addendum Addendum Addendum Addendum Addendum
T T T T Testing F esting F esting F esting F esting FA A A A ACP CP CP CP CP
Document 51045 Rev A 9/17/98 ECN 98-425
CMP-2401B/CMP-2402B CMP-2401B/CMP-2402B CMP-2401B/CMP-2402B CMP-2401B/CMP-2402B CMP-2401B/CMP-2402B
Remo Remo Remo Remo Remov v v v ve jumper from JP2 to disab e jumper from JP2 to disab e jumper from JP2 to disab e jumper from JP2 to disab e jumper from JP2 to disable le le le le
the Signal Silence Inhibit f the Signal Silence Inhibit f the Signal Silence Inhibit f the Signal Silence Inhibit f the Signal Silence Inhibit feature eature eature eature eature.....
Remo Remo Remo Remo Remov v v v ve jumper from JP3 to disab e jumper from JP3 to disab e jumper from JP3 to disab e jumper from JP3 to disab e jumper from JP3 to disable le le le le
the Alar the Alar the Alar the Alar the Alar m Rela m Rela m Rela m Rela m Relay dur y dur y dur y dur y dur ing testing. ing testing. ing testing. ing testing. ing testing.