SilentKnight VisorAlarm Manager User Manual
SilentKnight Safety
VisorALARM Manager – Quick Guide
1
Doc. DM380-I
Rev. 3.0
VisorALARM-Manager Application Quick Guide.
(Ver. 1.3)
Dm 380-I. V:3.0
1.
Installation Requirements
1.1. PC
•
Pentium III processor or higher.
•
Minimum RAM memory: 128 Mbytes
•
Operating system: Windows XP
TM
, Windows 2000
TM
.
•
Free hard disk space: 40 Mbytes
•
Minimum screen resolution: 1024x768, 256 colors.
•
Ethernet 10/100BT network card.
1.2. VisorALARM
•
Check that the VisorALARM firmware release is 10.6.19.0.3 or higher.
2.
Executing VisorALARM-Manager and connecting to a VisorALARM
Before executing the VisorALARM-Manager application, you need IP connectivity between
the PC and VisorALARM (the steps required to achieve connectivity are described in the
VisorALARM-Manager Quick Setup Guide.)
The initial application screen is as follows:
Figure 1
Enter the IP address for the VisorALARM you wish to access on this screen.
Once the connection is established, you need to authenticate with the VisorALARM: