Fire-Lite VisorALARM Manager Tool QUICK SETUP GUIDE - Manual (Page 8)

VISOR-ALARM Quick Setup Guide
8
Doc. DM381-I
Rev. 1.0
Fig. 10.
5. To save the configuration changes, select the ‘OK’ button on each of
the windows.
6. The changes are dynamic; consequently you do not need to reboot the
PC.
•
The VisorALARM has already been configured. What we need to know is the
VisorALARM IP address and carry out the actions indicated in the previous
point.
3.4. The next step is to check the IP connectivity between the PC and the
VisorALARM. Execute the PING command from the PC to the VisorALARM.
The following window displays the correct operating situation for the PING. This
indicates there is IP connectivity from the PC to the VisorALARM.