GEAR4 Xorb Wireless - Manual (Page 3)

2 GEAR4 | Xorb Wireless | User Manual
Xorb Wireless
Please read before use.
Product features:
■ Wireless Bluetooth speaker
■ 30W speaker output
■ Works with any Music Player / Smartphone /
Tablet with a 3.5mm headphone jack
■ 2.1A USB charging
■ Bass control
Getting started:
■ To activate the speaker, plug in the power
adapter.
■ The ON/OFF button must be fully depressed
in the ON position. This is located on the
back of the speaker.
■ For the speaker to work wirelessly with your
Bluetooth device, they must be paired.
Note: The speaker is in AUX mode by default.
If a device is connected to the speaker via
Bluetooth the speaker will automatically switch
to Bluetooth mode. If this connection is broken,
it will revert back to AUX mode.
Connect via Bluetooth:
■ Activate Bluetooth on your device.
■ Ensure that your Xorb Wireless is connected
to a power source and is turned ON.
■ Click the 'BASS/ ' button once to enter
pairing mode and the LED will flash blue
twice and a tone will sound.
■ 'Xorb' will appear on your Bluetooth device.
■ Select 'Xorb' and enter the password '0000' if
necessary.
■ The LED will turn solid blue and a tone will
sound to confirm your device has successfully
paired and is connected.
■ Ensure speaker volume is on full. Control the
volume through your music player.
Note: Xorb Wireless can only be paired to one
bluetooth device at any given time.
Connect via AUX IN:
■ Plug in power adaptor.
■ Plug in 3.5mm audio cable to 'AUX-IN' port.
■ Plug 3.5mm audio cable into the headphone
jack on your device.
■ Ensure speaker volume is on full. Control the
volume through your music player.
LED Status:
■ Power Off - LED OFF.
■ Power On, connected via AUX - LED solid red.