GEAR4 HouseParty Rise - Manual (Page 5)

3 GEAR4 | HouseParty Rise | User Manual
■ The minute display will start flashing. Press
/ to adjust the minutes. Press the SET
button to save.
■ The days of the week will start flashing.
Press / to choose between weekends,
weekdays or all week. Press the SET button
to save.
■ Press the / button to scan through alarm
modes – iPod, FM or buzzer. Press the SET
button to save.
■ Press the / button to set the volume.
Press the SET button to save.
Sleep / snooze functions:
■ Snooze: When the alarm sounds, press the
VOLUME / SNOOZE button on the speaker
or the ‘zZz’ button on the remote once to
delay the alarm by 10 minutes.
■ Press any button to stop the alarm for
that day.
■ The alarm will ring for 1 hour if no buttons
are pressed.
■ Sleep: The sleep timer switches the unit off
automatically after a set interval.
■ To activate the sleep timer, press the SLEEP
button repeatedly to select the desired time
(OFF, 10min, 20min, 30min, etc).
■ Leave the desired number on the screen to
set. After a few seconds it will disappear and
has now been saved. SLEEP will be
displayed on the screen.
■ To turn off the sleep timer, press the SLEEP
button and OFF will be displayed.
N.B. When setting the above functions, the
speaker will return to previous display after 3
seconds of no activity.
Register your HouseParty Rise to activate your
warranty and receive product updates at
www.gear4.com/register
Please ensure that your iPod / iPhone is
using the latest software version. To update
the software, connect your iPod / iPhone to
iTunes. If there is a newer software version
available you will be prompted to upgrade.
Copyright © 2011 Disruptive Limited. All rights
reserved. Reproduction in part or in whole is
prohibited. GEAR4, SmartLink and HouseParty
are trade marks of Disruptive Limited. iPhone,
iPod, iPod nano, iPod classic and iPod touch
are trade marks of Apple Inc., registered in the
U.S. and other countries.
“Made for iPod” and “Made for iPhone” mean
that an electronic accessory has been designed
to connect specifically to iPod or iPhone
respecitively and has been certified by the
developer to meet Apple performance standards.
Apple is not responsible for the operation of
this device or its compliance with safety and
regulatory standards.
GEAR4_PG534_HouseParty_Rise_Manual_V1.1.indd 3 05/05/2011 16:09