AT&T 1445/1145 - Manual (Page 18)

16
Directory Dialing
Speed dialing
Numbers called most frequently can be stored in memory
locations 1-9 and dialed with only two button presses.
You can enter 9 Speed Dial numbers up to 24 digits
long. Each number is stored in a one-digit memory
location (1-9).
To enter a Speed Dial number
1 Press
PROG
to begin programming.
2 Press ^ to display
SPEED DIAL
.
3 Press
SELECT
.
4 Press dial pad to choose memory location (1-9).
5 Enter a name (up to 15 characters), then press
SELECT
.
6 Enter a telephone number (up to 24 digits), then
press
SELECT
.
7 Choose distinctive ringing (yes or no).
8 Press
PROG or SELECT
to store the number. You
will hear a confirmation tone.
To call a Speed Dial number
To use speed dialing, press and hold a dial pad button
(1-9) to display the number and name stored in that
speed-dial location, then press
PHONE
to dial the
number.
To change or delete a Speed Dial number
Press and hold a dial pad button (1-9) to display the
entry you want. Press
SELECT
, then press ^ until
the option you want is displayed (see page 19).
1 PROG
DIRECTORY
2 ^
SPEED DIAL
3 SELECT
ENTER 1-9
ENTER NAME
01
(See Steps 3-7 on next
page.)
NOTE: To view another Speed Dial number, Press "OFF".
Follow the instruction "To call a Speed Dial Number"
to display another Speed Dial number.
91-5596-30-00_att1445manual_r0APR0104.qxd 1950/2/13 ⁄U⁄¨ 07:21 Page 16