GW Instek SFG-830 Software Manual User Manual
GW Instek Equipment
Advertising
Page 1
SFG-830 Using ARB Software
In SFG-830 ARB software, it only can edit 1Vpp maximum voltage.
But in SFG-830’s specification, it should measure 10Vpp maximum, why the software only
can edit 1Vpp?
If users want to set 10Vpp (or over 1Vpp amplitude signal) ARB signal, we need to use…
+
(ARB Software) (Set voltage amplitude in SFG-830)
Advertising