GW Instek GPT-800 Series - Manual

ELECTRICAL SAFETY TESTER
USER MANUAL
i
WARNING
MANUFACTURER ASSUMES NO LIABILITY
IF UNIT OPERATED IN AN UNSAFE
MANNER.
WARNING
THIS INSTRUMENT GENERATES AND
DELIVERS A HAZARDOUSLY HIGH
VOLTAGE (5kV). BE EXTREMELY
CAREFUL WHEN USING THIS
INSTRUMENT. BE SURE TO READ
MANUAL SECTION 3 PRECAUTIONS
ELECTRICAL SAFETY TESTER
USER MANUAL
ii
EC Declaration of Conformity
We
GOOD WILL INSTRUMENT CO., LTD.
No.7-1, Jhongsing Road, Tucheng City, Taipei County 236, Taiwan
GOOD WILL INSTRUMENT (SUZHOU) CO., LTD.
No. 69 Lushan Road, Suzhou New District Jiangsu, China.
declares that the below mentioned product
GPT-805/815, GPI-825/826
are herewith confirmed to comply with the requirements set out in the Council
Directive on the Approximation of the Law of Member States relating to
Electromagnetic Compatibility (89/336/EEC,92/31/EEC) and Low Voltage
Equipment Directive (73/23/EEC, 93/68/EEC).
For the evaluation regarding the Electromagnetic Compatibility and Low Voltage
Equipment Directive, the following standards were applied:
EN 61326-1: Electrical equipment for measurement, control and laboratory use ––
EMC requirements (1997+A1: 1998+A2:2001)
Conducted and Radiated Emissions
EN 55011 Group I class A: 1998 Electrostatic Discharge
EN 61000-4-2: 1995+A1 :1998
Current Harmonic
EN 61000-3-2: 2000 Radiated Immunity
EN 61000-4-3: 1996+A1 :1998
Voltage Fluctuation
EN 61000-3-3: 1995 Electrical Fast Transients
EN 61000-4-4: 1995
----------------------------------------------
Surge Immunity
EN 61000-4-5: 1995
----------------------------------------------
Conducted Susceptibility
EN 61000-4-6: 1996
----------------------------------------------
Power Frequency Magnetic Field
IEC 61000-4-8: 1993
----------------------------------------------
Voltage Dips/ Interrupts
EN 61000-4-11: 1994
Low Voltage Equipment Directive 73/23/EEC & amended by 93/68/EEC
Safety Requirements IEC/EN 61010-1: 2001
Remark: Also complied with Continuity of Protective Bonding Tester, Insulation
Resistance Test, Voltage Test, and Residual Voltage Test in accordance with
the Sub-Clauses 19.2, 19.3, 19.4 and 19.5 of EN 60204-1: 1997