Accusys RAID Controller ACS-77100 - Manual (Page 15)

http://www.accusys.com.tw 14
User’s Manual
Note
The device over 2TB capacity should be supported by
Operation System (e.g. Windows Vista). Please refer to section
3.5. Formatting and Partitioning the ACS-77100 to
partition the device.
3.3. Setting the Time and Date by LCD
To change the time and date on the LCD, press and hold the ENT button for five seconds.
Release the button to display the date and time setting screen.
To adjust the time and date values, use the Scroll buttons to change the values. (Figure 3.3.A)
Press the ENT button to confirm your selection and move to next value.
Start by adjusting the year (YY), then move to the month (MM), the day (DD), and finally the
hour (HH) and minute (MM).
Pressing the ENT button on the final selection will set the time and date. The Time and Date
will be displayed on the LCD during ACS-77100 stand-by mode. (Figure 3.3.B)
Note
The time is measured in the 24-hour clock format.