HT instruments THT60 - Manual (Page 38)

THT47 - THT60
EN - 36
Fig. 56: Selection temperature mode
CAUTION
The screen of Fig. 56 is also shown, as a shortcut, touch the high and low
level values located in the palette extremes in the right part of the display
4. Touch the icon “ ” for the setting of the adjustment mode. Touch the symbols “<” and
“>” for the selection of Automatic (A), Manual (M) or Histogram (H) modes
5. Touch the icon “ ” or the icon “ ” for the single settings of adjustment respectively of
high and low level of temperature. Touch the symbols “<” and “>” to carry out the
adjustment of the temperature range associated with the colour palette until reaching
the desired effect (see Fig. 57). Adjusting the levels is carried out with a fixed interval
defined by the instrument and which cannot be modified, and the colour palette
becomes white
Fig. 57: Single adjusting of high and low level of temperature
6. Touch the icon “ ” for the simultaneous adjustment of both high and low level of
temperature. Touch the symbols “<” and “>” to carry out the adjustment of the
temperature value associated with the palette up to reach the effect (see Fig. 58)
Fig. 58: Simultaneous adjusting of high and low level of temperature
7. At the end of the adjustment, the colour palette takes the original aspect again, with the
values of the desired minimum and maximum levels Touch the display to exit the
function