In-Situ Rugged TROLL 100/200 Operators Manual User Manual
Operator's manual, Rugged troll
Advertising
Operator's Manual
Rugged TROLL
®
100 and 200 and Rugged BaroTROLL
Instruments
Information subject to change without notice. In-Situ, In-Situ logo, Baro Merge, BaroTROLL, HERMIT, iSitu, Pocket-Situ, RDO,
RuggedCable, RuggedReader, TROLL, and Win-Situ are trademarks or registered trademarks of In-Situ Inc.
©
2013. All rights reserved.
0092440 | Rev. 001 | 09/2013
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- 1 Table of Contents
- 2 Introduction
- 3 Product Specifications
- 4 Overview
- 5 Getting Started
- 6 Software Overview
- 7 Using Win-Situ 5 Software
- Connecting an Instrument to the Software
- Selecting the Correct COM Port
- Setting the Instrument Time
- Adding a New Site
- Log Setup
- Logging Method Descriptions
- About the Level Reference
- Starting a Log
- Suspending (Pausing) a Log
- Resuming a Suspended Log
- Stopping a Log
- Downloading Data to a PC
- Viewing Logged Data
- Using BaroMerge Software
- Baro Merge Input—Fixed Correction
- Baro Merge Input—Manual Entry
- BaroMerge Output
- Disconnecting an Instrument from the Software
- 8 Maintenance, Cleaning, and Storage
- 9 Service
- 10 Decontamination and Cleaning Form
- 11 Declarations of Conformity and Similarity